PEER-REVIEWED PUBLICATION

2024

3D bioprinting meniscus tissue onboard the International Space Station

A tensile test divider icon

Klarmann GJ, Rogers AJ, et al.

Bioprinting

Uniformed Services University of the Health Sciences (4D Bio3 Center for Biotechnology), The Geneva Foundation, Redwire Space Technologies

RESEARCH SUMMARY
This study demonstrated extrusion bioprinting of an anatomically relevant meniscus-shaped tissue construct in microgravity aboard the International Space Station (ISS) using the BioFabrication Facility (BFF). A collagen- and chondroitin sulfate-based bioink (collagen I/II + methacrylated components with LAP photoinitiator) was mixed with human bone marrow MSCs on-orbit and printed into a support bath strategy (Pluronic containment “bathtub” plus a sheared agarose SLAM support) to overcome wetting/surface-tension challenges in microgravity. Following printing and 405 nm UV curing, constructs were intended to be cultured in ADSEP for 2 weeks, but media exchange malfunction resulted in prolonged static exposure to the same medium and later cold storage prior to return. Despite logistical/culture limitations, the ISS-printed meniscus showed good shape fidelity with dimensions comparable to ground controls. However, mechanical testing revealed substantially reduced stiffness: unconfined compression-derived Young’s modulus was ~9.8 kPa for ISS prints versus ~38.7 kPa for ground BFF prints, likely influenced by lower construct mass/density and/or differences in ink extrusion/crosslinking and culture history. Histology (H&E) indicated broadly similar cell distribution between ISS and ground prints, supporting feasibility of large-scale musculoskeletal bioprinting in microgravity and highlighting key operational constraints for future in-orbit tissue manufacturing.
CellScale hexagons, without text

CELLSCALE INSTRUMENT USED

UniVert

Returned ISS-printed and ground-control meniscus constructs were mechanically characterized using a CellScale UniVert via unconfined compression. Samples were blotted to remove residual RNAlater and compressed up to 20% strain over 60 seconds; the initial linear region of the stress–strain curve was fit to calculate Young’s modulus. UniVert testing quantified a ~4-fold lower modulus for the ISS-printed meniscus (~9.8 kPa) compared with the ground BFF control (~38.7 kPa), providing the primary quantitative comparison of construct stiffness after microgravity fabrication.
AUTHORS

George J. Klarmann, Aaron J. Rogers, Kristin H. Gilchrist, Vincent B. Ho.

PUBLICATION DETAILS
JOURNAL

Bioprinting

YEAR

2024

INSTITUTIONS

Uniformed Services University of the Health Sciences (4D Bio3 Center for Biotechnology), The Geneva Foundation, Redwire Space Technologies

COUNTRIES

United States

INSTRUMENT USED

UniVert

TESTING METHODS

Compression Testing

RESEARCH APPLICATIONS

3D Bioprinting & Bioink Materials TestingCartilage and Meniscus MechanicsMusculoskeletal Tissue Engineering & Mechanics

Related Publications:

Instrument Used:
Year:
Testing Method:
Research Application:
Country:

Reduced cortical bone strength and altered osteocyte canaliculi despite preserved bone mass in male Becn1+/− mice

Pei Q, Qin X, He Y, et al.

Bone

UniVert

Flexural and Bending Testing

Bone Tissue Engineering & Mechanics

2027

Preparation of hydrophobic semi-transparent regenerated cellulose composite membranes reinforced by low-cost ground calcium carbonate

Zhang Y, Jiang X, Yuan M, et al.

Food Packaging and Shelf Life

UniVert

Tensile Testing

Membranes and Thin Films MechanicsPolymers and Elastomers Testing

2026

A multifunctional graphene-integrated double-network nanocomposite hydrogel for dual strain-temperature wearable sensing

Romih A, Abdul Samad Y, Kim JK, Schiffer A

Advanced Composites and Hybrid Materials

UniVert

Adhesion TestingCompression TestingFatigue TestingTensile Testing

Adhesives and Sealants TestingHydrogel Mechanical TestingMaterial Fatigue and DurabilityStimuli Responsive Hydrogels CharacterizationWearable Bioelectronics

2026

Contact Sales

Product of Interest:
CellScale hexagon shapes