PEER-REVIEWED PUBLICATION

2025

Engineering a skin-mimicking asymmetric poly(L-lactic acid)/gelatin bioscaffold for skin repair

A tensile test divider icon

Zhu J, Chen C, et al.

Materials Technology

Guangzhou University of Chinese Medicine, Chang Gung University, Keelung University, Shantou University, National Taiwan University Hospital, Dongguan University of Technology, Mahatma Gandhi University

RESEARCH SUMMARY
This study developed a biomimetic asymmetric nanofibrous scaffold combining poly(L-lactic acid) (PLA) and gelatin to replicate layered epidermal–dermal architecture for enhanced skin repair. Using sequential and coaxial electrospinning, the team fabricated PLA top layers for barrier protection and gelatin-based porous bottom layers to promote hydration and cellular infiltration. Genipin crosslinking stabilized the gelatin layer and significantly enhanced scaffold mechanics, as confirmed by FTIR and TGA analyses. Structural evaluation (SEM and TEM) revealed uniform fiber morphology, defined core–shell organization, and increased nanofiber diameter after crosslinking. Mechanical characterization demonstrated that the PG(CL) membrane achieved tensile strength (3.60 ± 0.39 MPa), stiffness (103.65 ± 2.68 MPa), and controlled extensibility appropriate for skin-mimetic applications. Hydration/degradation studies showed bounded swelling and improved stability relative to non-crosslinked membranes. In vitro assays with NIH-3T3 fibroblasts confirmed high viability, enhanced proliferation, and superior wound closure (95% scratch closure at 48 h). Overall, the genipin-stabilized PG(CL) scaffold integrates structural, mechanical, and biological functionality suitable for next-generation wound dressings.
CellScale hexagons, without text

CELLSCALE INSTRUMENT USED

UniVert

Uniaxial tensile characterization of electrospun PLA, gelatin, PG(CS), and PG(CL) nanofibrous membranes was performed using a CellScale UniVert S mechanical testing system equipped with a 10 N load cell. Membranes (1 × 5 cm) were mounted between vertical grips with a 3 cm gauge length and tested at 5 mm/min. The UniVert S generated stress–strain profiles used to extract ultimate tensile strength, strain-to-failure, and Young’s modulus. These measurements were essential for determining scaffold suitability for epidermal–dermal regeneration and for quantifying the mechanical effects of genipin crosslinking.
AUTHORS

Jia-Ling Zhu, Chih-Hao Chen, Zi-Yu Gao, LinHui Qiu, Shuo Yang, ChenYu Sun, Yang Yang, YuanZe Li, Fang-Ting Wu, GuoLiang Tan, Pei-Hua Huang, Yu-Qing Niu, Yun-Fei Mo, Shalumon K.T., Yanghui Xing, Chia-Lin Sheu.

PUBLICATION DETAILS
JOURNAL

Materials Technology

YEAR

2025

INSTITUTIONS

Guangzhou University of Chinese Medicine, Chang Gung University, Keelung University, Shantou University, National Taiwan University Hospital, Dongguan University of Technology, Mahatma Gandhi University

COUNTRIES

China, India, Taiwan

INSTRUMENT USED

UniVert

TESTING METHODS

Tensile Testing

RESEARCH APPLICATIONS

ECM & Decellularized Matrix MechanicsHydrogel Mechanical TestingPolymers and Elastomers TestingScaffold Mechanical TestingSkin and Wound Healing Biomechanics

Related Publications:

Instrument Used:
Year:
Testing Method:
Research Application:
Country:

Reduced cortical bone strength and altered osteocyte canaliculi despite preserved bone mass in male Becn1+/− mice

Pei Q, Qin X, He Y, et al.

Bone

UniVert

Flexural and Bending Testing

Bone Tissue Engineering & Mechanics

2027

Preparation of hydrophobic semi-transparent regenerated cellulose composite membranes reinforced by low-cost ground calcium carbonate

Zhang Y, Jiang X, Yuan M, et al.

Food Packaging and Shelf Life

UniVert

Tensile Testing

Membranes and Thin Films MechanicsPolymers and Elastomers Testing

2026

A multifunctional graphene-integrated double-network nanocomposite hydrogel for dual strain-temperature wearable sensing

Romih A, Abdul Samad Y, Kim JK, Schiffer A

Advanced Composites and Hybrid Materials

UniVert

Adhesion TestingCompression TestingFatigue TestingTensile Testing

Adhesives and Sealants TestingHydrogel Mechanical TestingMaterial Fatigue and DurabilityStimuli Responsive Hydrogels CharacterizationWearable Bioelectronics

2026

Contact Sales

Product of Interest:
CellScale hexagon shapes