PEER-REVIEWED PUBLICATION

2017

In Situ Heart Valve Tissue Engineering Using a Bioresorbable Elastomeric Implant: From Material Design to 12-Month Follow-Up in Sheep

A tensile test divider icon

Kluin J, Talacua H, et al.

Biomaterials

Eindhoven University of Technology, University Medical Center Utrecht, University of Zurich, Xeltis BV, Amsterdam University Medical Centers, University Hospital Zurich, ETH Zürich, SyMO-Chem BV

RESEARCH SUMMARY
This landmark study establishes a synthetic, cell-free, resorbable elastomeric heart valve that regenerates in situ by recruiting host cells. The valve scaffold, fabricated from a polycarbonate-bisurea (PC-BU) supramolecular elastomer, was electrospun into fibrous leaflets and sutured to a PEEK ring. The elastomer was engineered for controlled degradation, elasticity, and cell-driven remodeling. Sheep received pulmonary valve replacements and were monitored for up to 12 months. All valves remained hemodynamically functional with minimal regurgitation and no calcification or thrombosis. Histological analysis revealed progressive infiltration by vimentin⁺ and α-SMA⁺ interstitial cells, development of a confluent endothelium (CD31⁺), and deposition of collagen, GAGs, and mature elastin fibers matching native tissue composition. By 12 months, the scaffold had partially resorbed where cellular activity was highest, leaving behind organized neo-tissue with native-like mechanical anisotropy. Transcatheter (Nitinol-stented) implantation was also demonstrated as feasible with full valve function for 6 months post-implantation. The study provides the first full demonstration of in situ regeneration of a functional, durable, and bioresorbable heart valve starting from a purely synthetic material.
CellScale hexagons, without text

CELLSCALE INSTRUMENT USED

BioTester

Mechanical evaluation of the synthetic scaffolds and explants was performed on a CellScale BioTester (1.5 N load cell) with LabJoy software. Biaxial tensile testing: 6 × 6 mm² samples from valve leaflets were stretched equibiaxially (30% strain) in both radial and circumferential directions at ~100 % min⁻¹. Preconditioning: 5 cycles of loading/unloading prior to testing. Outputs included tangent modulus, stress–strain curves, and non-linear elasticity. Native valves exhibited lower stiffness; explants showed transitional mechanics reflecting gradual tissue remodeling during scaffold resorption. The BioTester data were critical to confirming mechanical equivalence to native pulmonary tissue after 12 months and validating safety of slow, cell-mediated degradation.
AUTHORS

Jolanda Kluin, Hanna Talacua, Anthal I.P.M. Smits, Maximilian Y. Emmert, Marieke C.P. Brugmans, Emanuela S. Fioretta, Petra E. Dijkman, Serge H.M. Söntjens, Renee Duijvelshoff, Sylvia Dekker, Marloes W.J.T. Janssen-van den Broek, Valentina Lintas, Aryan Vink, Simon P. Hoerstrup, Henk M. Janssen, Patricia Y.W. Dankers, Frank P.T. Baaijens, Carlijn V.C. Bouten.

PUBLICATION DETAILS
JOURNAL

Biomaterials

YEAR

2017

INSTITUTIONS

Eindhoven University of Technology, University Medical Center Utrecht, University of Zurich, Xeltis BV, Amsterdam University Medical Centers, University Hospital Zurich, ETH Zürich, SyMO-Chem BV

COUNTRIES

Netherlands, Switzerland

INSTRUMENT USED

BioTester

TESTING METHODS

Biaxial TestingHydrated and Temperature Controlled TestingTensile TestingViscoelastic & Time-Dependent Testing

RESEARCH APPLICATIONS

ECM & Decellularized Matrix MechanicsHeart Valve Tissue Engineering & MechanicsInjectable & Regenerative BiomaterialsMechanotransductionScaffold Mechanical Testing

Related Publications:

Instrument Used:
Year:
Testing Method:
Research Application:
Country:

Effect of electron beam irradiation on the mechanical and solubility properties of nanofibrous electrospun polyurethane composite biomaterials

Webb CWB, Chen Y, D'Costa K, Santerre JP

Materials Letters

BioTester

Tensile Testing

Membranes and Thin Films MechanicsPolymers and Elastomers TestingScaffold Mechanical Testing

2027

Multiscale Characterization by Equibiaxial Tensile Testing and Time-Domain 1H Solid State NMR for PTMC-Based Networks for Tissue Growth

Feyne F, van Bochove B, Spoljaric S, et al.

Macromolecular Materials and Engineering

BioTester

Biaxial TestingViscoelastic & Time-Dependent Testing

Polymers and Elastomers Testing

2026

Electrospun PCL/Zein Fibers with Naringin or Naringenin for Potential Bone Repair Applications: Physicochemical and Preliminary Biological Evaluation

Enriquez-Lara C, Manríquez-Gallardo J, Lopez E, et al.

Journal of Functional Biomaterials

BioTester

Tensile Testing

Bone Tissue Engineering & MechanicsDrug Screening & Drug Delivery MechanicsMembranes and Thin Films MechanicsPolymers and Elastomers TestingScaffold Mechanical Testing

2026

Contact Sales

Product of Interest:
CellScale hexagon shapes