PEER-REVIEWED PUBLICATION

2026

Facile fabrication of hierarchically structured, stimulus-responsive sea cucumber collagen fibers and films

A tensile test divider icon

Farrow A, Singh NRH, House BJ, et al.

Acta Biomaterialia

McGill University

RESEARCH SUMMARY
This study developed a simple method for fabricating mechanically tunable collagen fibers, fibrous gels, and films from mutable collagenous tissue extracted from the sea cucumber Cucumaria frondosa. Unlike many reconstituted collagen systems, the materials were produced without covalent crosslinkers or synthetic polymer additives. Acidification caused the extracted collagen to self-assemble into fibrous gels that could be manually drawn into highly oriented fibers, while concentrated collagen solutions could be drop-cast into films. Multiscale structural characterization showed strong hierarchical organization and anisotropy extending from the molecular to macroscopic scale. Mechanical testing demonstrated substantial tunability through calcium addition, hydration, and environmental pH. Dry MCTC fibers exhibited an ultimate tensile strength of 29 ± 2 MPa, Young’s modulus of 318 ± 65 MPa, extensibility of 0.18 ± 0.07, and toughness of 2.5 ± 0.8 MJ/m³. Calcium-doped dry fibers increased strength to 43 ± 2 MPa and toughness to 8 ± 1 MJ/m³ while becoming more extensible. Hydration reduced strength and modulus to 4.0 ± 0.5 MPa and 13 ± 4 MPa, respectively, but increased extensibility to 1.3 ± 0.5. Cyclic loading revealed mechanical conditioning, hysteresis, and partial recovery after rest, while stress-relaxation experiments demonstrated time-dependent behavior. The hydrated fibers were also strongly pH responsive: modulus increased from 3.9 ± 0.3 MPa at pH 7.4 to 58 ± 18 MPa at pH 2.75. Within the mildly acidic pH range of human skin, hydrated fiber stiffness overlapped the reported 6-40 MPa range of skin. The authors further demonstrated strongly adhering MCTC films on human skin and a proof-of-concept topical delivery experiment in which rhodamine B diffused from MCTC films more than 2 mm into porcine skin over 72 hours. Overall, the study establishes sea-cucumber-derived collagen as a renewable, structurally organized, mechanically tunable biomaterial platform with potential applications in tissue scaffolding, cosmetics, soft materials, and topical drug delivery.
CellScale hexagons, without text

CELLSCALE INSTRUMENT USED

UStretch

A CellScale UStretch was used for tensile, cyclic, fatigue-related, stress-relaxation, and pH-dependent mechanical characterization of sea-cucumber-derived mutable collagenous tissue collagen fibers. Fibers were attached at their ends to waterproof paper using cyanoacrylate adhesive before mounting in the UStretch grips. Dry fibers were tested using a 4.5 N load cell, while hydrated fibers were tested using a 0.5 N FUTEK load cell. Hydrated specimens were stored in deionized water for at least 4 hours at 25 °C before testing and remained immersed in water during mechanical measurements. For pH-dependent experiments, fibers were equilibrated overnight in water baths adjusted with acetic acid and then tensile tested at the corresponding pH. Samples were extended at 3 mm/min with force data acquired at 5 Hz and analyzed using UStretch version 10.76 software. Pull-to-break testing quantified ultimate tensile strength, Young’s modulus, extensibility, and strain-energy-density-to-break. Dry MCTC fibers reached 29 ± 2 MPa ultimate strength and 318 ± 65 MPa modulus, while calcium-doped dry fibers reached 43 ± 2 MPa strength and 8 ± 1 MJ/m³ toughness. Hydration reduced modulus to 13 ± 4 MPa and strength to 4.0 ± 0.5 MPa while increasing extensibility to 1.3 ± 0.5. The UStretch was also used for cyclic loading within the fibers’ linear deformation regions. Dry fibers showed a 17% decrease in maximum stress over the initial 25 cycles, while hydrated fibers showed a 40% decrease over 10 cycles. After a 2-hour rest, both materials recovered residual strain and hysteresis, and dry fibers exhibited increased subsequent maximum stress and modulus, suggesting time-dependent recovery and self-stiffening. Stress-relaxation tests showed partial relaxation followed by a plateau, although no characteristic relaxation time could be extracted. Finally, UStretch testing across pH 2.75-7.4 demonstrated more than an order-of-magnitude tunability in hydrated-fiber modulus, increasing from 3.9 ± 0.3 MPa at pH 7.4 to 58 ± 18 MPa at pH 2.75. These measurements provided the main quantitative evidence that MCTC fibers are mechanically robust, viscoelastic, recoverable, and strongly responsive to hydration and environmental pH.
AUTHORS

Adaline Farrow, Nathalie R.H. Singh, Broderick J. House, Alexandre Poulhazan, Matthew J. Harrington.

PUBLICATION DETAILS
JOURNAL

Acta Biomaterialia

YEAR

2026

INSTITUTIONS

McGill University

COUNTRIES

Canada

INSTRUMENT USED

UStretch

TESTING METHODS

Fatigue TestingHydrated and Temperature Controlled TestingStress Relaxation TestingTensile TestingViscoelastic & Time-Dependent Testing

RESEARCH APPLICATIONS

Drug Screening & Drug Delivery MechanicsMaterial Fatigue and DurabilityPolymers and Elastomers Testing

Related Publications:

Instrument Used:
Year:
Testing Method:
Research Application:
Country:

Facile fabrication of hierarchically structured, stimulus-responsive sea cucumber collagen fibers and films

Farrow A, Singh NRH, House BJ, et al.

Acta Biomaterialia

UStretch

Fatigue TestingHydrated and Temperature Controlled TestingStress Relaxation TestingTensile TestingViscoelastic & Time-Dependent Testing

Drug Screening & Drug Delivery MechanicsMaterial Fatigue and DurabilityPolymers and Elastomers Testing

2026

Tissue-adhesive Hydrogel Optical Fiber for Peripheral Optogenetic Neuromodulation

Chen X, Wang L, et al.

Nature Communications

UStretch

Fatigue TestingHydrated and Temperature Controlled TestingShear TestingTensile Testing

Adhesives and Sealants TestingHydrogel Mechanical TestingPeripheral Nerve Regeneration & PNS MechanicsWearable Bioelectronics

2026

The Biomechanical Properties of Porcine Intervertebral Disc Tissue Treated with Different Fixation Solutions

Chow N, Sinopoli SI, et al.

Journal of the Mechanical Behavior of Biomedical Materials

BioTesterUStretch

Peel TestingTensile Testing

Intervertebral Disc Biomechanics

2026

Contact Sales

Product of Interest:
CellScale hexagon shapes