PEER-REVIEWED PUBLICATION

2025

Étude pilote : caractérisation biomécanique des tissus d’endométriose

Saiag N, Touboul C, et al.

26e Congrès Français de Mécanique

Université Paris - Est Créteil (UPEC), Sorbonne Université, CNRS

RESEARCH SUMMARY
This pilot study characterizes the biomechanical properties of deep endometriosis nodules, aiming to understand their hyperelastic behavior and inform diagnosis and treatment. Thirty-one biopsies were collected from 14 patients undergoing surgical resection at Hôpital Tenon. Uniaxial tensile tests were performed on freshly preserved samples to determine mechanical responses and constitutive parameters. Several hyperelastic models (Mooney-Rivlin, Ogden, and linear-elastic) were evaluated, showing that a 3-parameter Mooney-Rivlin model provided the best fit (R² = 0.99). The average elastic modulus was 48.97 ± 19.50 kPa, indicating a relatively high stiffness compared to surrounding pelvic tissue. The study demonstrates that endometriosis nodules exhibit complex non-linear elasticity, consistent with collagen fiber remodeling and the Mullins effect under cyclic loading.

CELLSCALE INSTRUMENT USED

BioTester

Uniaxial tensile testing of 31 deep endometriosis tissue samples was performed using a CellScale BioTester 5000 in displacement-controlled mode at 37 °C. Samples were hydrated with saline during testing and subjected to cyclic loading at 10%, 20%, 30%, 40%, and 50% strain, with five loading cycles per strain level. Force and displacement data were recorded to generate stress–strain curves, and mechanical parameters were fitted to linear, Mooney-Rivlin, and Ogden models. The BioTester 5000 enabled accurate measurement of soft tissue hyperelastic behavior and inter-sample variability.
AUTHORS

Noemie Saiag, Cyril Touboul, Fatma Ghuncha, Ali Aghaei, Madge Martin.

PUBLICATION DETAILS
JOURNAL

26e Congrès Français de Mécanique

YEAR

2025

INSTITUTIONS

Université Paris - Est Créteil (UPEC), Sorbonne Université, CNRS

COUNTRIES

France

INSTRUMENT USED

BioTester

TESTING METHODS

Hydrated and Temperature Controlled TestingMicro-Mechanical TestingTensile TestingViscoelastic & Time-Dependent Testing

RESEARCH APPLICATIONS

Fibrosis & Tissue RemodelingMechanotransductionPelvic Floor and Gynecological Biomechanics

Related Publications:

Instrument Used:
Year:
Testing Method:
Research Application:
Country:

Postpartum biomechanical adaptations of the anterior abdominal wall in a rat model: Implications for diastasis rectus abdominis

Lax M, Morgan M, et al.

Clinical Biomechanics

BioTester

Tensile Testing

Musculoskeletal Tissue Engineering & MechanicsPelvic Floor and Gynecological Biomechanics

2026

Comparison of Mechanical Properties of Patient-Specific Direct 3D-Printed Aortic Valve for Simulation Trainings: A Comparative Study

Cheheili Sobbi S, Pavlykova-Chertovska A, et al.

Innovations

BioTester

Digital Image Correlation (DIC)Tensile Testing

Cardiac Tissue Engineering & MechanicsHeart Valve Tissue Engineering & MechanicsPolymers and Elastomers Testing

2026

A deep neural network surrogate for fast mechanical parameter identification using the ring tensile test

Utrera A, Navarrete Á, et al.

Materials & Design

BioTester

Hydrated and Temperature Controlled TestingTensile Testing

MechanotransductionVascular Tissue Engineering & Mechanics

2026

Contact Sales

Product of Interest: