PEER-REVIEWED PUBLICATION

2025

Automated production of nerve repair constructs containing endothelial cell tube-like structures

A tensile test divider icon

Smith PO, Huang G, et al.

Biofabrication

University College London, McGill University

RESEARCH SUMMARY
This study reports the automated, scalable manufacture of engineered neural tissue (EngNT) constructs containing aligned endothelial cells designed for peripheral nerve repair. A low-cost automated gel aspiration–ejection (LcAuto-GAE) system was developed by integrating a syringe pump with a robotic positioning platform, enabling reproducible formation of densified, anisotropic collagen constructs within minutes. Endothelial cell–laden EngNT constructs exhibited high viability, consistent cellular alignment, and the formation of lumen-containing tube-like endothelial networks that resemble early vascular structures observed during nerve regeneration. In vitro assays demonstrated that EngNT-HUVEC constructs supported aligned neurite outgrowth from rat dorsal root ganglion neurons, with increased neurite length and directional guidance compared to acellular controls. Mechanical testing confirmed that construct stiffness and strength were comparable to previously reported EngNT systems, validating the automated approach as suitable for scalable manufacture of nerve repair grafts with translational potential. :contentReference[oaicite:1]{index=1}
CellScale hexagons, without text

CELLSCALE INSTRUMENT USED

UniVert

Mechanical characterization of acellular engineered neural tissue constructs was performed using a UniVert mechanical testing system. Constructs were mounted in spring-loaded grips and subjected to uniaxial tensile loading using a calibrated 10 N load cell at a controlled displacement rate of 0.1 mm s−1. Load–displacement data generated by the UniVert were converted to stress–strain curves based on construct cross-sectional area, enabling calculation of Young’s modulus and ultimate tensile strength. These measurements were used to compare mechanical consistency across construct sizes and to confirm suitability of the automated fabrication process for producing mechanically robust nerve repair scaffolds.
AUTHORS

Poppy O. Smith; Guanbingxue Huang; Kate Devries; Showan N. Nazhat; James B. Phillips.

PUBLICATION DETAILS
JOURNAL

Biofabrication

YEAR

2025

INSTITUTIONS

University College London, McGill University

COUNTRIES

Canada, United Kingdom

INSTRUMENT USED

UniVert

TESTING METHODS

Hydrated and Temperature Controlled TestingTensile Testing

RESEARCH APPLICATIONS

Cell Laden HydrogelsHydrogel Mechanical TestingMicrotissue and Spheroid MechanicsPeripheral Nerve Regeneration & PNS MechanicsScaffold Mechanical Testing

Related Publications:

Instrument Used:
Year:
Testing Method:
Research Application:
Country:

Reduced cortical bone strength and altered osteocyte canaliculi despite preserved bone mass in male Becn1+/− mice

Pei Q, Qin X, He Y, et al.

Bone

UniVert

Flexural and Bending Testing

Bone Tissue Engineering & Mechanics

2027

Preparation of hydrophobic semi-transparent regenerated cellulose composite membranes reinforced by low-cost ground calcium carbonate

Zhang Y, Jiang X, Yuan M, et al.

Food Packaging and Shelf Life

UniVert

Tensile Testing

Membranes and Thin Films MechanicsPolymers and Elastomers Testing

2026

A multifunctional graphene-integrated double-network nanocomposite hydrogel for dual strain-temperature wearable sensing

Romih A, Abdul Samad Y, Kim JK, Schiffer A

Advanced Composites and Hybrid Materials

UniVert

Adhesion TestingCompression TestingFatigue TestingTensile Testing

Adhesives and Sealants TestingHydrogel Mechanical TestingMaterial Fatigue and DurabilityStimuli Responsive Hydrogels CharacterizationWearable Bioelectronics

2026

Contact Sales

Product of Interest:
CellScale hexagon shapes