PEER-REVIEWED PUBLICATION

2026

Alginate scaffolds functionalized with calcium-stabilized cubic zirconia nanoparticles for periodontal tissue engineering

A tensile test divider icon

Santos MS, Ureña C, Rosa MT, et al.

Materials & Design

Instituto Superior Técnico, Universidade de Lisboa, Institute for Bioengineering and Biosciences, Institute for Health and Bioeconomy, NOVA School of Science and Technology, CEMOP/UNINOVA, Egas Moniz School of Health & Science

RESEARCH SUMMARY
This study developed shape-memory alginate scaffolds functionalized with calcium-stabilized cubic zirconia nanoparticles for periodontal tissue engineering and alveolar bone regeneration. The scaffolds were designed to combine the defect-conforming behavior of alginate with the mechanical reinforcement, biocompatibility, and osteogenic potential of zirconia. Both unmodified and c-ZrO2-functionalized scaffolds exhibited highly porous structures with average pore sizes near 290 µm. Incorporation of the nanoparticles reduced water uptake without significantly changing degradation over 21 days and substantially improved compressive mechanical properties. The mean compressive Young’s modulus increased from 16.5 ± 2.5 kPa for unmodified alginate scaffolds to 62.8 ± 13.5 kPa for alginate + c-ZrO2 scaffolds. The functionalized scaffolds remained non-cytotoxic and supported human periodontal ligament stem/stromal cell proliferation and osteogenic differentiation. PDLSC cultured on the c-ZrO2 scaffolds exhibited greater metabolic activity at day 14, a more elongated morphology, and approximately twofold greater phalloidin signal, indicating enhanced F-actin organization. Osteogenic and periodontogenic responses were also enhanced, including approximately sevenfold greater POSTN gene expression relative to pristine alginate scaffolds and increased expression of collagen I, asporin, osteocalcin, and periostin proteins. RHOA expression was significantly increased in cells cultured on the mechanically reinforced scaffolds, while YAP expression was comparable between groups. The authors propose that increased scaffold stiffness and nanoscale topographical cues promoted cytoskeletal remodeling and contributed to osteogenic and periodontogenic maturation. Overall, the study demonstrates that calcium-stabilized cubic zirconia can substantially reinforce shape-memory alginate scaffolds while preserving their regenerative properties and improving the biological response of periodontal ligament stem/stromal cells, supporting their potential for repair of irregular alveolar bone defects.
CellScale hexagons, without text

CELLSCALE INSTRUMENT USED

UniVert

A CellScale UniVert equipped with a 10 N load cell was used to quantify the compressive mechanical properties of unmodified alginate scaffolds and alginate scaffolds functionalized with calcium-stabilized cubic zirconia nanoparticles. Six independent specimens from each condition were first immersed in PBS for 24 hours, then measured and subjected to uniaxial compression at a displacement rate of 1 mm/min. Stress-strain curves were generated from the UniVert measurements, and compressive Young’s modulus was calculated from the slope of the initial linear region between 0% and 15% strain. The UniVert results showed a substantial mechanical reinforcement following nanoparticle incorporation: pristine alginate scaffolds had a mean Young’s modulus of 16.5 ± 2.5 kPa, whereas alginate + c-ZrO2 scaffolds reached 62.8 ± 13.5 kPa, an approximately 3.8-fold increase that was statistically significant. The compression experiments also demonstrated the shape-memory behavior of the rehydrated scaffolds. These measurements provided the central quantitative evidence that c-ZrO2 functionalization could reinforce the alginate scaffold sufficiently for mechanically demanding periodontal and alveolar-bone environments. The authors subsequently related the higher UniVert-measured stiffness of the functionalized scaffolds to changes in periodontal ligament stem/stromal cell morphology, cytoskeletal organization, osteogenic differentiation, and mechanotransduction-associated gene expression, including increased RHOA and periostin responses.
AUTHORS

Mafalda S. Santos, Carlos Ureña, Maria Teresa Rosa, Frederico Barbosa, Isabel Barahona, Cláudia L. da Silva, Daniela Nunes, Elvira Fortunato, Rodrigo Martins, Henrique Vazão de Almeida, João Carlos Silva.

PUBLICATION DETAILS
JOURNAL

Materials & Design

YEAR

2026

INSTITUTIONS

Instituto Superior Técnico, Universidade de Lisboa, Institute for Bioengineering and Biosciences, Institute for Health and Bioeconomy, NOVA School of Science and Technology, CEMOP/UNINOVA, Egas Moniz School of Health & Science

COUNTRIES

Portugal

INSTRUMENT USED

UniVert

TESTING METHODS

Compression Testing

RESEARCH APPLICATIONS

Bone Tissue Engineering & MechanicsDental & Oral Tissue BiomechanicsMechanotransductionScaffold Mechanical Testing

Related Publications:

Instrument Used:
Year:
Testing Method:
Research Application:
Country:

Reduced cortical bone strength and altered osteocyte canaliculi despite preserved bone mass in male Becn1+/− mice

Pei Q, Qin X, He Y, et al.

Bone

UniVert

Flexural and Bending Testing

Bone Tissue Engineering & Mechanics

2027

Alginate scaffolds functionalized with calcium-stabilized cubic zirconia nanoparticles for periodontal tissue engineering

Santos MS, Ureña C, Rosa MT, et al.

Materials & Design

UniVert

Compression Testing

Bone Tissue Engineering & MechanicsDental & Oral Tissue BiomechanicsMechanotransductionScaffold Mechanical Testing

2026

Decoupling Mechanical Reinforcement and Therapeutic Transport through Asymmetric Network Architecture in Single-Component GelMA Double-Network Hydrogels

Lim J, Lin CY, Bupphathong S, et al.

ACS Applied Polymer Materials

UniVert

Compression Testing

Drug Screening & Drug Delivery MechanicsHydrogel Mechanical Testing

2026

Contact Sales

Product of Interest:
CellScale hexagon shapes