PEER-REVIEWED PUBLICATION

2026

Multiscale Characterization by Equibiaxial Tensile Testing and Time-Domain 1H Solid State NMR for PTMC-Based Networks for Tissue Growth

A tensile test divider icon

Feyne F, van Bochove B, Spoljaric S, et al.

Macromolecular Materials and Engineering

Université Claude Bernard Lyon 1, INSA Lyon, Université Jean Monnet, CNRS UMR 5223 Ingénierie des Matériaux Polymères, University of Twente, The University of Melbourne, Université Paris-Est Créteil

RESEARCH SUMMARY
This study investigated how the molecular architecture of photo-crosslinked poly(trimethylene carbonate) networks controls their multiaxial mechanical behavior for biomedical tissue-growth applications. PTMC networks were synthesized from macromers with molecular weights of 3, 10, 17, and 25 kg/mol and characterized across multiple length scales using equibiaxial tensile testing, dynamic mechanical analysis, and time-domain proton solid-state NMR. DMA showed that storage modulus generally decreased as macromer molecular weight increased, while the width of the glass-transition response revealed differences in network heterogeneity. Time-domain 1H NMR measurements quantified molecular mobility, residual dipolar coupling, crosslink-density-related behavior, and the distribution of structural constraints within the networks. Equibiaxial testing showed that the 10 kg/mol PTMC network had the highest Young’s modulus at 6.08 ± 0.13 MPa, compared with 3.88 ± 0.09 MPa for 3 kg/mol, 3.53 ± 0.10 MPa for 17 kg/mol, and 3.93 ± 0.10 MPa for 25 kg/mol. The 10 kg/mol network also had the lowest anisotropy index at 1.5%, suggesting a comparatively homogeneous structure capable of resisting biaxial loading more uniformly. Loading-unloading curves exhibited measurable hysteresis, with dissipation ratios ranging from 0.08 to 0.22, indicating moderate viscoelastic energy loss and an initial microstructural reorganization followed by mechanical stabilization. Comparison of the mechanical and NMR results showed that macroscopic PTMC mechanics depend not only on average crosslink density but also on crosslink distribution, physical entanglements, and network heterogeneity. Overall, the study demonstrates the value of combining biaxial mechanics with molecular-scale characterization to understand structure-property relationships in biodegradable PTMC elastomer networks and guide their design for tissue-growth and biomedical applications.
CellScale hexagons, without text

CELLSCALE INSTRUMENT USED

BioTester

A CellScale BioTester equipped with 5 N load cells was used to perform equibiaxial tensile testing on photo-crosslinked PTMC networks prepared from macromers with molecular weights of 3, 10, 17, and 25 kg/mol. Samples were cut into cross-shaped specimens measuring 3 × 3 cm and mounted along two orthogonal loading axes using mechanical grips. Before data collection, each sample underwent two preconditioning tensile cycles to 2% strain along both axes. The BioTester then applied equibiaxial tensile loading at a strain rate of 1%/s, with the loading cycle repeated five times. Stress-strain curves from the BioTester were used to calculate elastic modulus from the initial region of the response, anisotropy index from the difference in Young’s modulus between the two loading directions, and dissipation ratio from the loading and unloading energies. The measurements showed that the 10 kg/mol PTMC network was the stiffest, with a Young’s modulus of 6.08 ± 0.13 MPa, compared with 3.88 ± 0.09 MPa for 3 kg/mol, 3.53 ± 0.10 MPa for 17 kg/mol, and 3.93 ± 0.10 MPa for 25 kg/mol. The 10 kg/mol network also showed the lowest anisotropy index at 1.5%, while the other formulations ranged from 4.6% to 14.6%. Loading-unloading data revealed moderate hysteresis and energy dissipation, with dissipation ratios between 0.08 and 0.22; the first loading cycle consistently showed greater dissipation than later cycles, suggesting initial network reorganization followed by mechanical stabilization. These BioTester measurements provided the macroscopic mechanical component of the study’s multiscale analysis and were directly compared with DMA and solid-state NMR measurements to relate network stiffness, anisotropy, viscoelastic dissipation, crosslink density, molecular mobility, and network heterogeneity.
AUTHORS

Florian Feyne, Bas van Bochove, Steve Spoljaric, Mustapha Zidi, Ali Aghaei, Agustín Rios de Anda.

PUBLICATION DETAILS
JOURNAL

Macromolecular Materials and Engineering

YEAR

2026

INSTITUTIONS

Université Claude Bernard Lyon 1, INSA Lyon, Université Jean Monnet, CNRS UMR 5223 Ingénierie des Matériaux Polymères, University of Twente, The University of Melbourne, Université Paris-Est Créteil

COUNTRIES

Australia, France, Netherlands

INSTRUMENT USED

BioTester

TESTING METHODS

Biaxial TestingViscoelastic & Time-Dependent Testing

RESEARCH APPLICATIONS

Polymers and Elastomers Testing

Related Publications:

Instrument Used:
Year:
Testing Method:
Research Application:
Country:

Effect of electron beam irradiation on the mechanical and solubility properties of nanofibrous electrospun polyurethane composite biomaterials

Webb CWB, Chen Y, D'Costa K, Santerre JP

Materials Letters

BioTester

Tensile Testing

Membranes and Thin Films MechanicsPolymers and Elastomers TestingScaffold Mechanical Testing

2027

Multiscale Characterization by Equibiaxial Tensile Testing and Time-Domain 1H Solid State NMR for PTMC-Based Networks for Tissue Growth

Feyne F, van Bochove B, Spoljaric S, et al.

Macromolecular Materials and Engineering

BioTester

Biaxial TestingViscoelastic & Time-Dependent Testing

Polymers and Elastomers Testing

2026

Electrospun PCL/Zein Fibers with Naringin or Naringenin for Potential Bone Repair Applications: Physicochemical and Preliminary Biological Evaluation

Enriquez-Lara C, Manríquez-Gallardo J, Lopez E, et al.

Journal of Functional Biomaterials

BioTester

Tensile Testing

Bone Tissue Engineering & MechanicsDrug Screening & Drug Delivery MechanicsMembranes and Thin Films MechanicsPolymers and Elastomers TestingScaffold Mechanical Testing

2026

Contact Sales

Product of Interest:
CellScale hexagon shapes