RESEARCH SUMMARY
This study developed adapt-ring networks, or ARNs, as a class of mechanically adaptive hydrogels capable of reorganizing and strengthening in response to repeated deformation. The materials combine a sparse covalently crosslinked polyethylene glycol network with dense, reconfigurable α-cyclodextrin crystalline domains. Rather than simply accumulating damage during repeated loading, the α-CD domains fragmented, moved along PEG chains, aligned with the applied strain, and formed kinetically trapped architectures that encoded the material’s mechanical history. Cyclic tensile training produced dramatic strain-dependent strengthening. For representative ARN(20k) hydrogels, increasing training strain raised Young’s modulus from approximately 0.3 MPa to 7.1 MPa and tensile strength from approximately 1.3 MPa to 11.5 MPa, while reducing strain at break. Mechanical training also increased fracture energy from 1.59 kJ/m² in pristine ARN(20k) to 13.2 kJ/m², while combined stretch-and-sonication training increased it to 40.8 kJ/m². Fatigue threshold increased from approximately 50 J/m² in pristine ARN(20k) to 770 J/m² after mechanical training and 1,366 J/m² after stretch-and-sonication training. Solvent exchange could erase the mechanically programmed state and restore the original network, allowing repeated cycles of adaptation, restoration, and retraining. The authors further demonstrated spatially resolved adaptation by subjecting ARN hydrogels mounted on a model knee joint to 12,000 bending cycles, creating local reinforcement that reflected the experienced strain distribution. Direct-ink-written ARN lattices retained their adaptive properties after printing. A second material architecture containing dangling PEG chains, termed d-ARN, could absorb additional α-CD from the surrounding environment during mechanical loading, enabling out-of-equilibrium crystalline-domain growth and further increases in modulus, strength, fracture energy, and fatigue resistance. Overall, the study establishes a bio-inspired polymer-network design in which mechanical history actively reorganizes material structure, allowing hydrogels to strengthen, develop spatial mechanical gradients, recover their initial state, and subsequently readapt.
A CellScale UniVert equipped with 10 N and/or 100 N load cells was used extensively to characterize and mechanically train the adapt-ring network hydrogels. The authors state that tensile testing, fracture-energy measurements, hysteresis experiments, mechanical training, and fatigue-threshold measurements were performed on the UniVert. For standard tensile characterization, dog-bone hydrogel specimens were mounted in tensile grips and stretched at 100 mm/min until rupture. UniVert force-displacement data were converted to nominal stress-strain curves and used to determine Young’s modulus, tensile strength, strain at break, and work of rupture. For mechanical programming, ARN hydrogels were repeatedly loaded and unloaded in silicone oil to prevent water loss, typically to 300% strain at 100 mm/min for 1,000 cycles. Increasing the training strain from 100% to 600% progressively increased Young’s modulus from approximately 0.3 to 7.1 MPa and tensile strength from approximately 1.3 to 11.5 MPa. The UniVert was also used for single-notch fracture testing and cyclic fatigue characterization. Mechanical training increased fracture energy from 1.59 kJ/m² in pristine ARN(20k) to 13.2 kJ/m², while stretch-and-sonication-trained samples reached 40.8 kJ/m². In cyclic crack-growth experiments, the fatigue threshold increased from approximately 50 J/m² in pristine ARN(20k) to 770 J/m² after mechanical training and 1,366 J/m² after stretch-and-sonication training. The system was additionally used in spatial-adaptation experiments in which rectangular ARN hydrogels were mounted on a model knee joint and subjected to 12,000 bending cycles at 600 mm/min. After this training, specimens were returned to the CellScale system for tensile characterization and digital image correlation analysis, revealing spatially graded reinforcement corresponding to the strain history experienced during bending. Together, the UniVert experiments provided the quantitative mechanical evidence that these hydrogels can reorganize under repeated loading, dramatically increase stiffness, strength, fracture resistance, and fatigue threshold, and encode spatial mechanical history.