PEER-REVIEWED PUBLICATION

2018

Urinary Bladder vs Gastrointestinal Tissue: A Comparative Study of Their Biomechanical Properties for Urinary Tract Reconstruction

Davis N, Mulvihill J, et al.

Urology

The Austin Hospital, University of Limerick

RESEARCH SUMMARY
This study performed a comparative biomechanical analysis of urinary bladder and gastrointestinal (GI) tissues to evaluate their suitability for urinary tract reconstruction. Using porcine models, planar tension tests were carried out on the bladder, stomach, jejunum, ileum, cecum, and colonic segments. Stress–stretch data revealed that bladder tissue exhibits a significantly more compliant response than GI segments, with higher strain at given stress and lower Young’s modulus. GI tissues were markedly stiffer and less distensible; only the stomach approached bladder compliance. Directional testing confirmed that bladder tissue is nearly isotropic, whereas GI segments were moderately anisotropic. Results indicate that bladder tissue’s elastic distensibility enables low-pressure volume expansion not achievable by GI substitutes. The authors concluded that autologous GI tissue is mechanically unsuited for durable bladder replacement, motivating biomaterials that better replicate bladder mechanics.

CELLSCALE INSTRUMENT USED

BioTester

Mechanical characterization of bladder and gastrointestinal tissues was conducted using a dedicated CellScale mechanical testing system designed for biological soft tissues. The CellScale device enabled precise uniaxial planar tensile testing under hydrated, temperature-controlled conditions (PBS at 37 °C), allowing accurate measurement of stretch–stress behavior, anisotropy, and stiffness across tissue types. Cyclic loading protocols implemented on the CellScale platform minimized viscoelastic artifacts and strain softening, ensuring reliable comparison of mechanical properties critical for evaluating candidate biomaterials for urinary bladder replacement.
AUTHORS

N.F. Davis, J.J.E. Mulvihill, S. Mulay, E.M. Cunnane, D.M. Bolton, M.T. Walsh.

PUBLICATION DETAILS
JOURNAL

Urology

YEAR

2018

INSTITUTIONS

The Austin Hospital, University of Limerick

COUNTRIES

Australia, Ireland

INSTRUMENT USED

BioTester

TESTING METHODS

Hydrated and Temperature Controlled TestingMicro-Mechanical TestingTensile TestingViscoelastic & Time-Dependent Testing

RESEARCH APPLICATIONS

ECM & Decellularized Matrix MechanicsGastrointestinal and Urinary Tract BiomechanicsInjectable & Regenerative Biomaterials

Related Publications:

Instrument Used:
Year:
Testing Method:
Research Application:
Country:

Anti-CD31 antibody preconditioning for enhancement of endothelial cell capture and vascularization: a novel strategy for bioengineering lung scaffolds

Kamata S, Zargar A, et al.

Journal of Biological Engineering

BioTester

Tensile Testing

ECM & Decellularized Matrix MechanicsLung and Pleural Tissue BiomechanicsScaffold Mechanical TestingVascular Tissue Engineering & Mechanics

2026

In Vivo Evaluation of Efficacy and Safety of Oxygen-Supplemented Accelerated Scleral Cross-Linking Over Time in Young Rabbits

Ben Hilal H, Zhang J, et al.

Translational Vision Science & Technology

BioTester

Hydrated and Temperature Controlled TestingTensile Testing

Ophthalmic Biomechanics & Corneal Tissue Engineering

2026

Modeling mechanical and electromechanical behavior of polymers

Shah N H, Ajaj R M, et al.

Mechanics of Advanced Materials and Structures

BioTester

Biaxial TestingShear TestingTensile Testing

Electroactive and Photothermal PolymersPolymers and Elastomers TestingSoft Robotics Materials

2026

Contact Sales

Product of Interest: