PEER-REVIEWED PUBLICATION

2024

Off-the-Shelf Synthetic Biodegradable Grafts Transform In Situ into a Living Arteriovenous Fistula in a Large Animal Model

Besseling PJ, Szymczyk W, et al.

Advanced Healthcare Materials

Eindhoven University of Technology, SyMO - Chem BV, Utrecht University, University Medical Center Utrecht

RESEARCH SUMMARY
This study demonstrates the in situ transformation of a synthetic, cell-free, biodegradable vascular graft into a living, compliant arteriovenous fistula (AVF) in goats. The scaffold comprised electrospun polycarbonate-bisurea (PC-BU) with a 3D-printed polycaprolactone (PCL) anti-kink coil (6 mm diameter). After 3 months, grafts were largely resorbed and replaced by autologous tissue containing elastin, contractile αSMA⁺ smooth muscle cells, and endothelial lining. Mechanical testing revealed an estimated modulus comparable to native carotids, while ePTFE controls remained significantly stiffer. No calcification or fibrosis was detected. Macrophage polarization favored M2 (CD163⁺) over M1 (iNOS⁺), indicating regenerative remodeling. Though 3-month patency was 50% (vs 100% for ePTFE), all grafts were cannulatable with rapid hemostasis. The study validates the feasibility of off-the-shelf vascular grafts that remodel into living, self-healing conduits within 3 months.

CELLSCALE INSTRUMENT USED

BioTester

Mechanical characterization was performed using a CellScale BioTester (Waterloo, Canada) with LabJoy software and 5 or 23 N load cells in a uniaxial ring-testing configuration. Ring segments (2–3 mm length) were mounted on 1 mm hooks and preloaded to 100 mN before testing. Tests involved 50% preconditioning strain, then stretch-to-failure at ~100 % min⁻¹ strain rate. Modulus and stress–strain data were computed from displacement and force outputs, confirming mechanical parity between explanted TE grafts and native carotid arteries. Imaging documented the BioTester ring-stretch setup, and modulus comparisons across timepoints and materials.
AUTHORS

Paul J. Besseling, Wojciech Szymczyk, Martin Teraa, Raechel J. Toorop, Dan Jing Wu, Rob C.H. Driessen, Arturo M. Lichauco, Henk M. Janssen, Melanie van de Kaa, Krista den Ouden, Petra M. de Bree, Joost O. Fledderus, Carlijn V.C. Bouten, Gert J. de Borst, Patricia Y.W. Dankers, Marianne C. Verhaar.

PUBLICATION DETAILS
JOURNAL

Advanced Healthcare Materials

YEAR

2024

INSTITUTIONS

Eindhoven University of Technology, SyMO - Chem BV, Utrecht University, University Medical Center Utrecht

COUNTRIES

Netherlands

INSTRUMENT USED

BioTester

TESTING METHODS

Tensile Testing

RESEARCH APPLICATIONS

ECM & Decellularized Matrix MechanicsFibrosis & Tissue RemodelingInjectable & Regenerative BiomaterialsVascular Tissue Engineering & Mechanics

Related Publications:

Instrument Used:
Year:
Testing Method:
Research Application:
Country:

Anti-CD31 antibody preconditioning for enhancement of endothelial cell capture and vascularization: a novel strategy for bioengineering lung scaffolds

Kamata S, Zargar A, et al.

Journal of Biological Engineering

BioTester

Tensile Testing

ECM & Decellularized Matrix MechanicsLung and Pleural Tissue BiomechanicsScaffold Mechanical TestingVascular Tissue Engineering & Mechanics

2026

In Vivo Evaluation of Efficacy and Safety of Oxygen-Supplemented Accelerated Scleral Cross-Linking Over Time in Young Rabbits

Ben Hilal H, Zhang J, et al.

Translational Vision Science & Technology

BioTester

Hydrated and Temperature Controlled TestingTensile Testing

Ophthalmic Biomechanics & Corneal Tissue Engineering

2026

Modeling mechanical and electromechanical behavior of polymers

Shah N H, Ajaj R M, et al.

Mechanics of Advanced Materials and Structures

BioTester

Biaxial TestingShear TestingTensile Testing

Electroactive and Photothermal PolymersPolymers and Elastomers TestingSoft Robotics Materials

2026

Contact Sales

Product of Interest: