PEER-REVIEWED PUBLICATION

2026

Enabling dual excitation-contraction recording and disease modeling via hydrogel-free heart tissue

Li J, Liu Y, et al.

Cell Reports Physical Science

Osaka University, Osaka Dental University, Osaka Police Hospital

RESEARCH SUMMARY
This study introduces a dual excitation–contraction (DEC) platform that forms hydrogel-free engineered human iPSC-derived 3D cardiac tissue on an aligned fibrous scaffold and enables concurrent electrophysiology and contractility readouts in a format compatible with planar multi-electrode array (MEA) systems. The chip supports formation of a small (~150 µm diameter) anisotropic 3D tissue that self-organizes from an initial monolayer and produces measurable mechanical beating alongside MEA field potentials. The authors validated the platform using multiple reference drugs spanning torsade de pointes (TdP) risk (e.g., isoproterenol, E4031, verapamil, ondansetron, azimilide), showing that contractile force and electrical endpoints can diverge (e.g., force becoming undetectable at verapamil doses where electrical activity persists) and that arrhythmogenic events (e.g., EADs) correspond to reduced force output. The system was further applied to disease modeling using MYBPC3-deficient iPSC lines, reproducing impaired systolic force generation and reduced capture at higher pacing frequencies, demonstrating utility for combined functional phenotyping and drug safety assessment.

CELLSCALE INSTRUMENT USED

MicroTester

A CellScale MicroTester (MicroTester G2) was used to calibrate the DEC chip’s PDMS-strip force sensor by directly measuring the force response during controlled compression of the PDMS strip. In the calibration setup, the PDMS strip was bonded to a PDMS block and a cantilever beam (0.30 mm diameter) was pressed against the strip and moved downward to deform it to defined ratios. During each measurement, the beam was held while force was recorded; force was computed from cantilever-beam deflection as a function of differential displacement under increasing compression. The resulting force–displacement dataset was fit via interpolation to generate the calibration equation used to convert measured PDMS-strip displacement (x-projection quantified from video/ImageJ in the DEC recordings) into contractile force readouts for the cardiac tissues.
AUTHORS

Junjun Li, Yuting Liu, Ying Hua, Maki Takeda, Nagako Sougawa, Shigeru Miyagawa, Xuanrong Bao, Lifu Sun, Yoshiki Sawa, Li Liu.

PUBLICATION DETAILS
JOURNAL

Cell Reports Physical Science

YEAR

2026

INSTITUTIONS

Osaka University, Osaka Dental University, Osaka Police Hospital

COUNTRIES

Japan

INSTRUMENT USED

MicroTester

TESTING METHODS

Compression TestingMicro-Mechanical TestingUltra Low Force Testing

RESEARCH APPLICATIONS

Cardiac Tissue Engineering & MechanicsDrug Screening & Drug Delivery MechanicsOrgan-On-A-Chip Systems

Related Publications:

Instrument Used:
Year:
Testing Method:
Research Application:
Country:

3D fractal topography attenuates inflammation and confers resilience to glomerular podocytes

Wang Y, Dikyol C, et al.

Cell Biomaterials

MicroTester

Hydrated and Temperature Controlled TestingIndentation TestingMicro-Mechanical Testing

Fibrosis & Tissue RemodelingMechanotransductionOrganoid and Tissue Mimetic Systems

2026

Mechanically graded granular scaffolds for osteochondral tissue engineering

Mierswa SC, Wheeler EE, et al.

Biomaterials Advances

MicroTester

Compression TestingHydrated and Temperature Controlled TestingMicro-Mechanical Testing

Bone Tissue Engineering & MechanicsCartilage and Meniscus MechanicsScaffold Mechanical Testing

2026

3D-printed scaffolds encapsulating red-blood-cell-derived extracellular vesicles for microRNA delivery

Huang C, Jayasinghe MK, et al.

Cell Biomaterials

MicroTester

Compression TestingMicro-Mechanical Testing

3D Bioprinting & Bioink Materials TestingDrug Screening & Drug Delivery MechanicsNeural Tissue & CNS MechanicsScaffold Mechanical Testing

2026

Contact Sales

Product of Interest: